FLSUN T1: power use and running cost
Enclosed delta printer claiming 1000 mm/s; build volume is a 260 mm diameter cylinder, 330 mm tall. 260 × 260 × 330 mm build volume, enclosed.
130 Waverage while printing
15 Widle / standby
400 Wpeak while heating
400 Wpower supply rating
1.30 kWhper 10-hour print
$0.22per 10-hour print at $0.17/kWh
$449typical price (2024)
1000 mm/smax speed · 300 °C nozzle · 110 °C bed
Power figure: estimated. Estimated from FLSUN's 400 W rated power and 260 mm round bed; no plug-meter review found.
Electricity cost for a print on the FLSUN T1
Full cost of a print on the FLSUN T1
Pre-set with this printer's wattage and price for depreciation. Enter grams and hours from your slicer.
Questions about the FLSUN T1
How many watts does the FLSUN T1 use?
About 130 W on average while printing PLA, 15 W when idle and up to 400 W while heating. Estimated from FLSUN's 400 W rated power and 260 mm round bed; no plug-meter review found.
How much does it cost to run a FLSUN T1 for 24 hours?
3.1 kWh, which is $0.53 at $0.17/kWh (US average) or about £0.81 at UK rates.
Does the FLSUN T1 use a lot of electricity?
No. Running it 8 hours a day for a month costs roughly $5.30 at US rates — comparable to a desktop computer.